The sane-mustek_usb2 library implements a SANE (Scanner Access Now
Easy) backend that provides access to USB flatbed scanners based on the
Service & Quality SQ113 chipset. At the moment, only the Mustek BearPaw
2448 TA Pro is supported. It's planned to add support for other scan-
ners that are based on the SQ113 and maybe SQ11 chip. For more details,
see the mustek_usb2 backend homepage:
This is BETA software. Especially if you test new or untested scanners,
keep your hand at the scanner's plug and unplug it, if the head bumps
at the end of the scan area.
If you own a scanner other than the ones listed on the mustek_usb2
homepage that works with this backend, please let me know this by send-
ing the scanner's exact model name and the USB vendor and device ids
(e.g. from sane-find-scanner or syslog) to me. Even if the scanner's
name is only slightly different from the models already listed as sup-
ported, please let me know.
Please use libusb-0.1.8 or later. Without libusb or with older libusb
versions all kinds of trouble can be expected. The scanner should be
found by sane-find-scanner without further actions. For setting permis-
sions and general USB information looks at sane-usb(5).
The static library implementing this backend.
The shared library implementing this backend (present on systems
that support dynamic loading).
If the library was compiled with debug support enabled, this
environment variable controls the debug level for this backend.
Higher debug levels increase the verbosity of the output.
Example: export SANE_DEBUG_MUSTEK_USB2=4
sane(7), sane-usb(5), sane-plustek(5), sane-ma1509(5),
sane-mustek_usb(5), sane-mustek(5), sane-mustek_pp(5)
The driver has been written Roy Zhou, Jack Xu, and Vinci Cen from
Mustek. Adjustments to SANE by Henning Meier-Geinitz.
Man Pages Copyright Respective Owners. Site Copyright (C) 1994 - 2019
All Rights Reserved.