sane-magicolor

sane-magicolor(5)        SANE Scanner Access Now Easy        sane-magicolor(5)

NAME
       sane-magicolor - SANE backend for KONICA MINOLTA magicolor scanners

DESCRIPTION
       The  sane-magicolor  backend supports KONICA MINOLTA magicolor scanners
       connected via USB or LAN. Currently, only the magicolor  1690MF  device
       is  supported,  no  other  devices  with the same scanning protocol are
       known.

SUPPORTED DEVICES
       The following scanner should work with this backend:

       Device Details
       -----------------------------
       Vendor: KONICA MINOLTA
       Model: magicolor 1690MF

CONFIGURATION
       This section describes the backend's configuration  file  entries.  The
       file is located at:

              @CONFIGDIR@/magicolor.conf

       For a proper setup, at least one of the following entries are needed:

              net autodiscovery
              net [IP ADDRESS] [DEVICE-ID]
              usb
              usb [VENDOR-ID] [DEVICE-ID]

FILES
       @CONFIGDIR@/magicolor.conf
              The backend configuration file

       @LIBDIR@/libsane-magicolor.a
              The static library implementing this backend.

       @LIBDIR@/libsane-magicolor.so
              The shared library implementing this backend (present on systems
              that support dynamic loading).

ENVIRONMENT
       SANE_CONFIG_DIR
              This environment variable specifies the list of directories that
              may contain the configuration file.  Under UNIX, the directories
              are separated by a colon (`:'), under OS/2, they  are  separated
              by a semi-colon (`;').  If this variable is not set, the config-
              uration file is searched in two default directories: first,  the
              current working directory (".") and then in @CONFIGDIR@.  If the
              value of the environment variable ends with the directory  sepa-
              rator character, then the default directories are searched after
              the explicitly  specified  directories.   For  example,  setting
              SANE_CONFIG_DIR  to  "/tmp/config:"  would result in directories
              "/tmp/config", ".", and "@CONFIGDIR@" being  searched  (in  this
              order).

       SANE_DEBUG_MAGICOLOR
              If the library was compiled with debug support enabled, this en-
              vironment variable controls the debug level  for  this  backend.
              Higher debug levels increase the verbosity of the output.

              Example: export SANE_DEBUG_MAGICOLOR=127

              To  obtain debug messages from the backend, set this environment
              variable before calling your favorite  frontend  (e.g.  xscanim-
              age).

              Example: SANE_DEBUG_MAGICOLOR=65 xscanimage

KNOWN BUGS AND RESTRICTIONS
       Large  color  scans  may  sometimes timeout due to unknown reasons (the
       scanner simply stops returning data)

       Cancelling large scans may lock up the scanner.

SEE ALSO
       sane(7),
       http://wiki.kainhofer.com/hardware/magicolor_scan

AUTHOR
       Reinhold Kainhofer <reinhold@kainhofer.com>

@PACKAGEVERSION@                  10 Jan 2011                sane-magicolor(5)
Man Pages Copyright Respective Owners. Site Copyright (C) 1994 - 2024 Hurricane Electric. All Rights Reserved.