sane-hp4200(5) SANE Scanner Access Now Easy sane-hp4200(5)
sane-hp4200 - SANE backend for Hewlett-Packard 4200 scanners
The sane-hp4200 library implements a SANE (Scanner Access Now Easy)
backend that provides access to the following Hewlett-Packard USB
ScanJet 4200 C
ScanJet 4200 Cxi
ScanJet 4200 Cse
More details can be found on the hp4200 backend homepage
This is BETA software. Keep your hand at the scanner's plug and unplug
it, if the head bumps at the end of the scan area.
If you own a scanner other than the ones listed above that works with
this backend, please let us know this by sending the scanner's exact
model name and the USB vendor and device ids (e.g. from
/proc/bus/usb/devices, sane-find-scanner or syslog) to us. Even if the
scanner's name is only slightly different from the models mentioned
above, please let us know.
The contents of the hp4200.conf file is a list of usb lines containing
vendor and product ids that correspond to USB scanners. The file can
also contain the names of device files that correspond to an HP 4200
scanner. Empty lines and lines starting with a hash mark (#) are
ignored. The scanners are autodetected by usb vendor_id product_id
statements which are already included into hp4200.conf. "vendor_id"
and "product_id" are hexadecimal numbers that identify the scanner. If
autodetection does not work, add the device name of your scanner to the
configuration file, e.g. /dev/usb/scanner0.
The backend configuration file (see also description of
The static library implementing this backend.
The shared library implementing this backend (present on systems
that support dynamic loading).
This environment variable specifies the list of directories that
may contain the configuration file. Under UNIX, the directories
are separated by a colon (`:'), under OS/2, they are separated
by a semi-colon (`;'). If this variable is not set, the config-
uration file is searched in two default directories: first, the
current working directory (".") and then in @CONFIGDIR@. If the
value of the environment variable ends with the directory sepa-
rator character, then the default directories are searched after
the explicitly specified directories. For example, setting
SANE_CONFIG_DIR to "/tmp/config:" would result in directories
"tmp/config", ".", and "@CONFIGDIR@" being searched (in this
If the library was compiled with debug support enabled, this
environment variable controls the debug level for this backend.
Higher debug levels increase the verbosity of the output.
Example: export SANE_DEBUG_HP4200=4
Adrian Perez Jorge, Andrew John Lewis, Arnar Mar Hrafnkelsson, Frank
Zago, Henning Meier-Geinitz. Current maintainer: Henning Meier-Geinitz
Tested only with Linux.
Only 8 bit color mode works.
Scanning is slow due to backtracking.
Send bug reports to the sane-devel mailing list:
@PACKAGEVERSION@ 13 Jul 2008 sane-hp4200(5)
Man Pages Copyright Respective Owners. Site Copyright (C) 1994 - 2021
All Rights Reserved.