freeaddrinfo
GETADDRINFO(3) Linux Programmer's Manual GETADDRINFO(3)
NAME
getaddrinfo, freeaddrinfo, gai_strerror - network address and service
translation
SYNOPSIS
#include <sys/types.h>
#include <sys/socket.h>
#include <netdb.h>
int getaddrinfo(const char *node, const char *service,
const struct addrinfo *hints,
struct addrinfo **res);
void freeaddrinfo(struct addrinfo *res);
const char *gai_strerror(int errcode);
Feature Test Macro Requirements for glibc (see feature_test_macros(7)):
getaddrinfo(), freeaddrinfo(), gai_strerror():
Since glibc 2.22: _POSIX_C_SOURCE >= 200112L
Glibc 2.21 and earlier: _POSIX_C_SOURCE
DESCRIPTION
Given node and service, which identify an Internet host and a service,
getaddrinfo() returns one or more addrinfo structures, each of which
contains an Internet address that can be specified in a call to bind(2)
or connect(2). The getaddrinfo() function combines the functionality
provided by the gethostbyname(3) and getservbyname(3) functions into a
single interface, but unlike the latter functions, getaddrinfo() is
reentrant and allows programs to eliminate IPv4-versus-IPv6 dependen-
cies.
The addrinfo structure used by getaddrinfo() contains the following
fields:
struct addrinfo {
int ai_flags;
int ai_family;
int ai_socktype;
int ai_protocol;
socklen_t ai_addrlen;
struct sockaddr *ai_addr;
char *ai_canonname;
struct addrinfo *ai_next;
};
The hints argument points to an addrinfo structure that specifies cri-
teria for selecting the socket address structures returned in the list
pointed to by res. If hints is not NULL it points to an addrinfo
structure whose ai_family, ai_socktype, and ai_protocol specify crite-
ria that limit the set of socket addresses returned by getaddrinfo(),
as follows:
ai_family This field specifies the desired address family for the re-
turned addresses. Valid values for this field include
AF_INET and AF_INET6. The value AF_UNSPEC indicates that
getaddrinfo() should return socket addresses for any ad-
dress family (either IPv4 or IPv6, for example) that can be
used with node and service.
ai_socktype This field specifies the preferred socket type, for example
SOCK_STREAM or SOCK_DGRAM. Specifying 0 in this field in-
dicates that socket addresses of any type can be returned
by getaddrinfo().
ai_protocol This field specifies the protocol for the returned socket
addresses. Specifying 0 in this field indicates that
socket addresses with any protocol can be returned by
getaddrinfo().
ai_flags This field specifies additional options, described below.
Multiple flags are specified by bitwise OR-ing them to-
gether.
All the other fields in the structure pointed to by hints must contain
either 0 or a null pointer, as appropriate.
Specifying hints as NULL is equivalent to setting ai_socktype and
ai_protocol to 0; ai_family to AF_UNSPEC; and ai_flags to
(AI_V4MAPPED | AI_ADDRCONFIG). (POSIX specifies different defaults for
ai_flags; see NOTES.) node specifies either a numerical network ad-
dress (for IPv4, numbers-and-dots notation as supported by
inet_aton(3); for IPv6, hexadecimal string format as supported by
inet_pton(3)), or a network hostname, whose network addresses are
looked up and resolved. If hints.ai_flags contains the AI_NUMERICHOST
flag, then node must be a numerical network address. The AI_NUMERI-
CHOST flag suppresses any potentially lengthy network host address
lookups.
If the AI_PASSIVE flag is specified in hints.ai_flags, and node is
NULL, then the returned socket addresses will be suitable for
bind(2)ing a socket that will accept(2) connections. The returned
socket address will contain the "wildcard address" (INADDR_ANY for IPv4
addresses, IN6ADDR_ANY_INIT for IPv6 address). The wildcard address is
used by applications (typically servers) that intend to accept connec-
tions on any of the host's network addresses. If node is not NULL,
then the AI_PASSIVE flag is ignored.
If the AI_PASSIVE flag is not set in hints.ai_flags, then the returned
socket addresses will be suitable for use with connect(2), sendto(2),
or sendmsg(2). If node is NULL, then the network address will be set
to the loopback interface address (INADDR_LOOPBACK for IPv4 addresses,
IN6ADDR_LOOPBACK_INIT for IPv6 address); this is used by applications
that intend to communicate with peers running on the same host.
service sets the port in each returned address structure. If this ar-
gument is a service name (see services(5)), it is translated to the
corresponding port number. This argument can also be specified as a
decimal number, which is simply converted to binary. If service is
NULL, then the port number of the returned socket addresses will be
left uninitialized. If AI_NUMERICSERV is specified in hints.ai_flags
and service is not NULL, then service must point to a string containing
a numeric port number. This flag is used to inhibit the invocation of
a name resolution service in cases where it is known not to be re-
quired.
Either node or service, but not both, may be NULL.
The getaddrinfo() function allocates and initializes a linked list of
addrinfo structures, one for each network address that matches node and
service, subject to any restrictions imposed by hints, and returns a
pointer to the start of the list in res. The items in the linked list
are linked by the ai_next field.
There are several reasons why the linked list may have more than one
addrinfo structure, including: the network host is multihomed, accessi-
ble over multiple protocols (e.g., both AF_INET and AF_INET6); or the
same service is available from multiple socket types (one SOCK_STREAM
address and another SOCK_DGRAM address, for example). Normally, the
application should try using the addresses in the order in which they
are returned. The sorting function used within getaddrinfo() is de-
fined in RFC 3484; the order can be tweaked for a particular system by
editing /etc/gai.conf (available since glibc 2.5).
If hints.ai_flags includes the AI_CANONNAME flag, then the ai_canonname
field of the first of the addrinfo structures in the returned list is
set to point to the official name of the host.
The remaining fields of each returned addrinfo structure are initial-
ized as follows:
* The ai_family, ai_socktype, and ai_protocol fields return the socket
creation parameters (i.e., these fields have the same meaning as the
corresponding arguments of socket(2)). For example, ai_family might
return AF_INET or AF_INET6; ai_socktype might return SOCK_DGRAM or
SOCK_STREAM; and ai_protocol returns the protocol for the socket.
* A pointer to the socket address is placed in the ai_addr field, and
the length of the socket address, in bytes, is placed in the ai_ad-
drlen field.
If hints.ai_flags includes the AI_ADDRCONFIG flag, then IPv4 addresses
are returned in the list pointed to by res only if the local system has
at least one IPv4 address configured, and IPv6 addresses are returned
only if the local system has at least one IPv6 address configured. The
loopback address is not considered for this case as valid as a config-
ured address. This flag is useful on, for example, IPv4-only systems,
to ensure that getaddrinfo() does not return IPv6 socket addresses that
would always fail in connect(2) or bind(2).
If hints.ai_flags specifies the AI_V4MAPPED flag, and hints.ai_family
was specified as AF_INET6, and no matching IPv6 addresses could be
found, then return IPv4-mapped IPv6 addresses in the list pointed to by
res. If both AI_V4MAPPED and AI_ALL are specified in hints.ai_flags,
then return both IPv6 and IPv4-mapped IPv6 addresses in the list
pointed to by res. AI_ALL is ignored if AI_V4MAPPED is not also speci-
fied.
The freeaddrinfo() function frees the memory that was allocated for the
dynamically allocated linked list res.
Extensions to getaddrinfo() for Internationalized Domain Names
Starting with glibc 2.3.4, getaddrinfo() has been extended to selec-
tively allow the incoming and outgoing hostnames to be transparently
converted to and from the Internationalized Domain Name (IDN) format
(see RFC 3490, Internationalizing Domain Names in Applications (IDNA)).
Four new flags are defined:
AI_IDN If this flag is specified, then the node name given in node is
converted to IDN format if necessary. The source encoding is
that of the current locale.
If the input name contains non-ASCII characters, then the IDN
encoding is used. Those parts of the node name (delimited by
dots) that contain non-ASCII characters are encoded using ASCII
Compatible Encoding (ACE) before being passed to the name reso-
lution functions.
AI_CANONIDN
After a successful name lookup, and if the AI_CANONNAME flag was
specified, getaddrinfo() will return the canonical name of the
node corresponding to the addrinfo structure value passed back.
The return value is an exact copy of the value returned by the
name resolution function.
If the name is encoded using ACE, then it will contain the xn--
prefix for one or more components of the name. To convert these
components into a readable form the AI_CANONIDN flag can be
passed in addition to AI_CANONNAME. The resulting string is en-
coded using the current locale's encoding.
AI_IDN_ALLOW_UNASSIGNED, AI_IDN_USE_STD3_ASCII_RULES
Setting these flags will enable the IDNA_ALLOW_UNASSIGNED (allow
unassigned Unicode code points) and IDNA_USE_STD3_ASCII_RULES
(check output to make sure it is a STD3 conforming hostname)
flags respectively to be used in the IDNA handling.
RETURN VALUE
getaddrinfo() returns 0 if it succeeds, or one of the following nonzero
error codes:
EAI_ADDRFAMILY
The specified network host does not have any network addresses
in the requested address family.
EAI_AGAIN
The name server returned a temporary failure indication. Try
again later.
EAI_BADFLAGS
hints.ai_flags contains invalid flags; or, hints.ai_flags in-
cluded AI_CANONNAME and name was NULL.
EAI_FAIL
The name server returned a permanent failure indication.
EAI_FAMILY
The requested address family is not supported.
EAI_MEMORY
Out of memory.
EAI_NODATA
The specified network host exists, but does not have any network
addresses defined.
EAI_NONAME
The node or service is not known; or both node and service are
NULL; or AI_NUMERICSERV was specified in hints.ai_flags and ser-
vice was not a numeric port-number string.
EAI_SERVICE
The requested service is not available for the requested socket
type. It may be available through another socket type. For ex-
ample, this error could occur if service was "shell" (a service
available only on stream sockets), and either hints.ai_protocol
was IPPROTO_UDP, or hints.ai_socktype was SOCK_DGRAM; or the er-
ror could occur if service was not NULL, and hints.ai_socktype
was SOCK_RAW (a socket type that does not support the concept of
services).
EAI_SOCKTYPE
The requested socket type is not supported. This could occur,
for example, if hints.ai_socktype and hints.ai_protocol are in-
consistent (e.g., SOCK_DGRAM and IPPROTO_TCP, respectively).
EAI_SYSTEM
Other system error, check errno for details.
The gai_strerror() function translates these error codes to a human
readable string, suitable for error reporting.
FILES
/etc/gai.conf
ATTRIBUTES
For an explanation of the terms used in this section, see at-
tributes(7).
+----------------+---------------+--------------------+
|Interface | Attribute | Value |
+----------------+---------------+--------------------+
|getaddrinfo() | Thread safety | MT-Safe env locale |
+----------------+---------------+--------------------+
|freeaddrinfo(), | Thread safety | MT-Safe |
|gai_strerror() | | |
+----------------+---------------+--------------------+
CONFORMING TO
POSIX.1-2001, POSIX.1-2008. The getaddrinfo() function is documented
in RFC 2553.
NOTES
getaddrinfo() supports the address%scope-id notation for specifying the
IPv6 scope-ID.
AI_ADDRCONFIG, AI_ALL, and AI_V4MAPPED are available since glibc 2.3.3.
AI_NUMERICSERV is available since glibc 2.3.4.
According to POSIX.1, specifying hints as NULL should cause ai_flags to
be assumed as 0. The GNU C library instead assumes a value of
(AI_V4MAPPED | AI_ADDRCONFIG) for this case, since this value is con-
sidered an improvement on the specification.
EXAMPLE
The following programs demonstrate the use of getaddrinfo(), gai_str-
error(), freeaddrinfo(), and getnameinfo(3). The programs are an echo
server and client for UDP datagrams.
Server program
#include <sys/types.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <sys/socket.h>
#include <netdb.h>
#define BUF_SIZE 500
int
main(int argc, char *argv[])
{
struct addrinfo hints;
struct addrinfo *result, *rp;
int sfd, s;
struct sockaddr_storage peer_addr;
socklen_t peer_addr_len;
ssize_t nread;
char buf[BUF_SIZE];
if (argc != 2) {
fprintf(stderr, "Usage: %s port\n", argv[0]);
exit(EXIT_FAILURE);
}
memset(&hints, 0, sizeof(struct addrinfo));
hints.ai_family = AF_UNSPEC; /* Allow IPv4 or IPv6 */
hints.ai_socktype = SOCK_DGRAM; /* Datagram socket */
hints.ai_flags = AI_PASSIVE; /* For wildcard IP address */
hints.ai_protocol = 0; /* Any protocol */
hints.ai_canonname = NULL;
hints.ai_addr = NULL;
hints.ai_next = NULL;
s = getaddrinfo(NULL, argv[1], &hints, &result);
if (s != 0) {
fprintf(stderr, "getaddrinfo: %s\n", gai_strerror(s));
exit(EXIT_FAILURE);
}
/* getaddrinfo() returns a list of address structures.
Try each address until we successfully bind(2).
If socket(2) (or bind(2)) fails, we (close the socket
and) try the next address. */
for (rp = result; rp != NULL; rp = rp->ai_next) {
sfd = socket(rp->ai_family, rp->ai_socktype,
rp->ai_protocol);
if (sfd == -1)
continue;
if (bind(sfd, rp->ai_addr, rp->ai_addrlen) == 0)
break; /* Success */
close(sfd);
}
if (rp == NULL) { /* No address succeeded */
fprintf(stderr, "Could not bind\n");
exit(EXIT_FAILURE);
}
freeaddrinfo(result); /* No longer needed */
/* Read datagrams and echo them back to sender */
for (;;) {
peer_addr_len = sizeof(struct sockaddr_storage);
nread = recvfrom(sfd, buf, BUF_SIZE, 0,
(struct sockaddr *) &peer_addr, &peer_addr_len);
if (nread == -1)
continue; /* Ignore failed request */
char host[NI_MAXHOST], service[NI_MAXSERV];
s = getnameinfo((struct sockaddr *) &peer_addr,
peer_addr_len, host, NI_MAXHOST,
service, NI_MAXSERV, NI_NUMERICSERV);
if (s == 0)
printf("Received %zd bytes from %s:%s\n",
nread, host, service);
else
fprintf(stderr, "getnameinfo: %s\n", gai_strerror(s));
if (sendto(sfd, buf, nread, 0,
(struct sockaddr *) &peer_addr,
peer_addr_len) != nread)
fprintf(stderr, "Error sending response\n");
}
}
Client program
#include <sys/types.h>
#include <sys/socket.h>
#include <netdb.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#define BUF_SIZE 500
int
main(int argc, char *argv[])
{
struct addrinfo hints;
struct addrinfo *result, *rp;
int sfd, s, j;
size_t len;
ssize_t nread;
char buf[BUF_SIZE];
if (argc < 3) {
fprintf(stderr, "Usage: %s host port msg...\n", argv[0]);
exit(EXIT_FAILURE);
}
/* Obtain address(es) matching host/port */
memset(&hints, 0, sizeof(struct addrinfo));
hints.ai_family = AF_UNSPEC; /* Allow IPv4 or IPv6 */
hints.ai_socktype = SOCK_DGRAM; /* Datagram socket */
hints.ai_flags = 0;
hints.ai_protocol = 0; /* Any protocol */
s = getaddrinfo(argv[1], argv[2], &hints, &result);
if (s != 0) {
fprintf(stderr, "getaddrinfo: %s\n", gai_strerror(s));
exit(EXIT_FAILURE);
}
/* getaddrinfo() returns a list of address structures.
Try each address until we successfully connect(2).
If socket(2) (or connect(2)) fails, we (close the socket
and) try the next address. */
for (rp = result; rp != NULL; rp = rp->ai_next) {
sfd = socket(rp->ai_family, rp->ai_socktype,
rp->ai_protocol);
if (sfd == -1)
continue;
if (connect(sfd, rp->ai_addr, rp->ai_addrlen) != -1)
break; /* Success */
close(sfd);
}
if (rp == NULL) { /* No address succeeded */
fprintf(stderr, "Could not connect\n");
exit(EXIT_FAILURE);
}
freeaddrinfo(result); /* No longer needed */
/* Send remaining command-line arguments as separate
datagrams, and read responses from server */
for (j = 3; j < argc; j++) {
len = strlen(argv[j]) + 1;
/* +1 for terminating null byte */
if (len > BUF_SIZE) {
fprintf(stderr,
"Ignoring long message in argument %d\n", j);
continue;
}
if (write(sfd, argv[j], len) != len) {
fprintf(stderr, "partial/failed write\n");
exit(EXIT_FAILURE);
}
nread = read(sfd, buf, BUF_SIZE);
if (nread == -1) {
perror("read");
exit(EXIT_FAILURE);
}
printf("Received %zd bytes: %s\n", nread, buf);
}
exit(EXIT_SUCCESS);
}
SEE ALSO
getaddrinfo_a(3), gethostbyname(3), getnameinfo(3), inet(3),
gai.conf(5), hostname(7), ip(7)
COLOPHON
This page is part of release 5.05 of the Linux man-pages project. A
description of the project, information about reporting bugs, and the
latest version of this page, can be found at
https://www.kernel.org/doc/man-pages/.
GNU 2019-03-06 GETADDRINFO(3)
Man Pages Copyright Respective Owners. Site Copyright (C) 1994 - 2024
Hurricane Electric.
All Rights Reserved.