tc filter ... route [ from REALM | fromif TAG ] [ to REALM ] [ classid
CLASSID ] [ action ACTION_SPEC ]
Match packets based on routing table entries. This filter centers
around the possibility to assign a realm to routing table entries. For
any packet to be classified by this filter, a routing table lookup is
performed and the returned realm is used to decide on whether the
packet is a match or not.
Apply an action from the generic actions framework on matching
Push matching packets into the class identified by CLASSID.
Perform source route lookups. TAG is the name of an interface
which must be present on the system at the time of tc invoca-
Match if normal (i.e., destination) routing returns the given
Consider the subnet 192.168.2.0/24 being attached to eth0:
ip route add 192.168.2.0/24 dev eth0 realm 2
The following route filter will then match packets from that subnet:
tc filter add ... route from 2 classid 1:2
and pass packets on to class 1:2.
Due to implementation details, realm values must be in a range from 0
to 255, inclusive. Alternatively, a verbose name defined in
/etc/iproute2/rt_realms may be given instead.
iproute2 21 Oct 2015 Route classifier in tc(8)
Man Pages Copyright Respective Owners. Site Copyright (C) 1994 - 2019
All Rights Reserved.