lspcmcia - display extended PCMCIA debugging information
pccardctl [-V] [-v ...] command [socket]
lspcmcia [-V] [-v ...] [socket]
pccardctl is used to monitor and control the state of PCMCIA sockets.
If a socket number is specified, the command will be applied to just
one socket; otherwise, all sockets will be affected.
If pccardctl is executed by root, all commands are available. If it is
executed by an unpriviledged user, only the informational commands are
lspcmcia is an alias for pccardctl ls, provided for convenience.
Display the current socket status flags.
Display the socket configuration, including power settings, inter-
rupt and I/O window settings, and configuration registers. --not
Display card identification information, including product identi-
fication strings, manufacturer ID codes, and function ID codes.
Not yet implemented for cardbus cards. Use lspci instead.
Much like the ident command, but its output is formatted as a
series of Bourne-stype shell variable definitions for use in
scripts. Not yet implemented for cardbus cards.
ls Display extended debugging information about the PCMCIA sockets and
devices present in the system.
Shut down and then disable power for a socket.
Restore power to a socket, and re-configure for use.
Notify all client drivers that this card will be ejected,
then cut power to the socket.
Notify all client drivers that this card has just been
based upon the original cardctl man page by
David Hinds - email@example.com
pcmciautils 2005/10/22 PCCARDCTL(8)
Man Pages Copyright Respective Owners. Site Copyright (C) 1994 - 2019
All Rights Reserved.