ip-nexthop
IP-NEXTHOP(8) Linux IP-NEXTHOP(8)
NAME
ip-nexthop - nexthop object management
SYNOPSIS
ip [ ip-OPTIONS ] nexthop { COMMAND | help }
ip nexthop { show | flush } SELECTOR
ip nexthop { add | replace } id ID NH
ip nexthop { get | del } id ID
SELECTOR := [ id ID ] [ dev DEV ] [ vrf NAME ] [ master DEV ] [ groups
]
NH := { blackhole | [ via ADDRESS ] [ dev DEV ] [ onlink ] [ encap EN-
CAP ] | group GROUP }
ENCAP := [ ENCAP_MPLS ]
ENCAP_MPLS := mpls [ LABEL ] [ ttl TTL ]
GROUP := id[,weight[/...]
DESCRIPTION
ip nexthop is used to manipulate entries in the kernel's nexthop ta-
bles.
ip nexthop add id ID
add new nexthop entry
ip nexthop replace id ID
change the configuration of a nexthop or add new one
via [ FAMILY ] ADDRESS
the address of the nexthop router, in the address family
FAMILY. Address family must match address family of nex-
thop instance.
dev NAME
is the output device.
onlink pretend that the nexthop is directly attached to this
link, even if it does not match any interface prefix.
encap ENCAPTYPE ENCAPHDR
attach tunnel encapsulation attributes to this route.
ENCAPTYPE is a string specifying the supported encapsula-
tion type. Namely:
mpls - encapsulation type MPLS
ENCAPHDR is a set of encapsulation attributes specific to
the ENCAPTYPE.
mpls
MPLSLABEL - mpls label stack with labels sepa-
rated by /
ttl TTL - TTL to use for MPLS header or 0 to
inherit from IP header
group GROUP
create a nexthop group. Group specification is id with an
optional weight (id,weight) and a '/' as a separator be-
tween entries.
blackhole
create a blackhole nexthop
ip nexthop delete id ID
delete nexthop with given id.
ip nexthop show
show the contents of the nexthop table or the nexthops selected
by some criteria.
dev DEV
show the nexthops using the given device.
vrf NAME
show the nexthops using devices associated with the vrf
name
master DEV
show the nexthops using devices enslaved to given master
device
groups show only nexthop groups
ip nexthop flush
flushes nexthops selected by some criteria. Criteria options are
the same as show.
ip nexthop get id ID
get a single nexthop by id
EXAMPLES
ip nexthop ls
Show all nexthop entries in the kernel.
ip nexthop add id 1 via 192.168.1.1 dev eth0
Adds an IPv4 nexthop with id 1 using the gateway 192.168.1.1 out
device eth0.
ip nexthop add id 2 encap mpls 200/300 via 10.1.1.1 dev eth0
Adds an IPv4 nexthop with mpls encapsulation attributes attached to
it.
ip nexthop add id 3 group 1/2
Adds a nexthop with id 3. The nexthop is a group using nexthops
with ids 1 and 2 at equal weight.
ip nexthop add id 4 group 1,5/2,11
Adds a nexthop with id 4. The nexthop is a group using nexthops
with ids 1 and 2 with nexthop 1 at weight 5 and nexthop 2 at weight
11.
SEE ALSO
ip(8)
AUTHOR
Original Manpage by David Ahern <dsahern@kernel.org>
iproute2 30 May 2019 IP-NEXTHOP(8)
Man Pages Copyright Respective Owners. Site Copyright (C) 1994 - 2024
Hurricane Electric.
All Rights Reserved.