RTNETLINK(7)               Linux Programmer's Manual              RTNETLINK(7)

       rtnetlink - Linux IPv4 routing socket

       #include <asm/types.h>
       #include <linux/if_link.h>
       #include <linux/netlink.h>
       #include <linux/rtnetlink.h>
       #include <sys/socket.h>

       rtnetlink_socket = socket(AF_NETLINK, int socket_type, NETLINK_ROUTE);

       Rtnetlink  allows  the  kernel's routing tables to be read and altered.
       It is used within the kernel to communicate between various subsystems,
       though  this  usage  is not documented here, and for communication with
       user-space programs.  Network routes, IP  addresses,  link  parameters,
       neighbor setups, queueing disciplines, traffic classes and packet clas-
       sifiers may all be controlled through  NETLINK_ROUTE  sockets.   It  is
       based on netlink messages; see netlink(7) for more information.

   Routing attributes
       Some  rtnetlink  messages  have  optional  attributes after the initial

           struct rtattr {
               unsigned short rta_len;    /* Length of option */
               unsigned short rta_type;   /* Type of option */
               /* Data follows */

       These attributes should be manipulated using only the RTA_*  macros  or
       libnetlink, see rtnetlink(3).

       Rtnetlink  consists  of  these  message  types (in addition to standard
       netlink messages):

              Create, remove or get information about a specific  network  in-
              terface.  These messages contain an ifinfomsg structure followed
              by a series of rtattr structures.

              struct ifinfomsg {
                  unsigned char  ifi_family; /* AF_UNSPEC */
                  unsigned short ifi_type;   /* Device type */
                  int            ifi_index;  /* Interface index */
                  unsigned int   ifi_flags;  /* Device flags  */
                  unsigned int   ifi_change; /* change mask */

              ifi_flags contains the device flags, see netdevice(7); ifi_index
              is  the  unique interface index (since Linux 3.7, it is possible
              to feed a nonzero value with the RTM_NEWLINK message, thus  cre-
              ating a link with the given ifindex); ifi_change is reserved for
              future use and should be always set to 0xFFFFFFFF.

                                 Routing attributes
              rta_type         value type         description
              IFLA_UNSPEC      -                  unspecified.

              IFLA_ADDRESS     hardware address   interface L2 address
              IFLA_BROADCAST   hardware address   L2 broadcast address.
              IFLA_IFNAME      asciiz string      Device name.
              IFLA_MTU         unsigned int       MTU of the device.
              IFLA_LINK        int                Link type.
              IFLA_QDISC       asciiz string      Queueing discipline.
              IFLA_STATS       see below          Interface Statistics.

       The value type for IFLA_STATS is struct rtnl_link_stats (struct net_de-
       vice_stats in Linux 2.4 and earlier).

              Add,  remove  or receive information about an IP address associ-
              ated with an interface.  In Linux 2.2, an  interface  can  carry
              multiple IP addresses, this replaces the alias device concept in
              2.0.  In Linux 2.2, these messages support  IPv4  and  IPv6  ad-
              dresses.   They  contain an ifaddrmsg structure, optionally fol-
              lowed by rtattr routing attributes.

              struct ifaddrmsg {
                  unsigned char ifa_family;    /* Address type */
                  unsigned char ifa_prefixlen; /* Prefixlength of address */
                  unsigned char ifa_flags;     /* Address flags */
                  unsigned char ifa_scope;     /* Address scope */
                  unsigned int  ifa_index;     /* Interface index */

              ifa_family is the address  family  type  (currently  AF_INET  or
              AF_INET6),  ifa_prefixlen  is  the length of the address mask of
              the address if defined for the family (like for IPv4), ifa_scope
              is  the  address  scope, ifa_index is the interface index of the
              interface the address is associated with.  ifa_flags is  a  flag
              word  of IFA_F_SECONDARY for secondary address (old alias inter-
              face), IFA_F_PERMANENT for a permanent address set by  the  user
              and other undocumented flags.

              rta_type        value type             description
              IFA_UNSPEC      -                      unspecified.
              IFA_ADDRESS     raw protocol address   interface address
              IFA_LOCAL       raw protocol address   local address
              IFA_LABEL       asciiz string          name of the interface
              IFA_BROADCAST   raw protocol address   broadcast address.
              IFA_ANYCAST     raw protocol address   anycast address
              IFA_CACHEINFO   struct ifa_cacheinfo   Address information.

              Create,  remove  or  receive  information about a network route.
              These messages contain an rtmsg structure with an  optional  se-
              quence  of  rtattr structures following.  For RTM_GETROUTE, set-
              ting rtm_dst_len and rtm_src_len to 0 means you get all  entries
              for  the  specified routing table.  For the other fields, except
              rtm_table and rtm_protocol, 0 is the wildcard.

              struct rtmsg {
                  unsigned char rtm_family;   /* Address family of route */
                  unsigned char rtm_dst_len;  /* Length of destination */
                  unsigned char rtm_src_len;  /* Length of source */
                  unsigned char rtm_tos;      /* TOS filter */

                  unsigned char rtm_table;    /* Routing table ID */
                  unsigned char rtm_protocol; /* Routing protocol; see below */
                  unsigned char rtm_scope;    /* See below */
                  unsigned char rtm_type;     /* See below */

                  unsigned int  rtm_flags;

              rtm_type          Route type
              RTN_UNSPEC        unknown route
              RTN_UNICAST       a gateway or direct route
              RTN_LOCAL         a local interface route
              RTN_BROADCAST     a  local  broadcast  route  (sent  as  a
              RTN_ANYCAST       a  local broadcast route (sent as a uni-
              RTN_MULTICAST     a multicast route
              RTN_BLACKHOLE     a packet dropping route
              RTN_UNREACHABLE   an unreachable destination
              RTN_PROHIBIT      a packet rejection route
              RTN_THROW         continue routing lookup in another table
              RTN_NAT           a network address translation rule
              RTN_XRESOLVE      refer to an external resolver  (not  im-

              rtm_protocol      Route origin.
              RTPROT_UNSPEC     unknown
              RTPROT_REDIRECT   by  an ICMP redirect (cur-
                                rently unused)
              RTPROT_KERNEL     by the kernel
              RTPROT_BOOT       during boot
              RTPROT_STATIC     by the administrator

              Values larger than RTPROT_STATIC are not interpreted by the ker-
              nel,  they  are  just for user information.  They may be used to
              tag the source of a routing information or  to  distinguish  be-
              tween multiple routing daemons.  See <linux/rtnetlink.h> for the
              routing daemon identifiers which are already assigned.

              rtm_scope is the distance to the destination:

              RT_SCOPE_UNIVERSE   global route
              RT_SCOPE_SITE       interior route in the  lo-
                                  cal autonomous system
              RT_SCOPE_LINK       route on this link
              RT_SCOPE_HOST       route on the local host
              RT_SCOPE_NOWHERE    destination doesn't exist

              The  values  between  RT_SCOPE_UNIVERSE  and  RT_SCOPE_SITE  are
              available to the user.

              The rtm_flags have the following meanings:

              RTM_F_NOTIFY     if the route changes, notify the  user  via
              RTM_F_CLONED     route is cloned from another route
              RTM_F_EQUALIZE   a multipath equalizer (not yet implemented)

              rtm_table specifies the routing table

              RT_TABLE_UNSPEC    an unspecified routing table
              RT_TABLE_DEFAULT   the default table
              RT_TABLE_MAIN      the main table
              RT_TABLE_LOCAL     the local table

              The user may assign arbitrary values between RT_TABLE_UNSPEC and

              rta_type        value type         description
              RTA_UNSPEC      -                  ignored.
              RTA_DST         protocol address   Route destination address.
              RTA_SRC         protocol address   Route source address.
              RTA_IIF         int                Input interface index.
              RTA_OIF         int                Output interface index.
              RTA_GATEWAY     protocol address   The gateway of the route
              RTA_PRIORITY    int                Priority of route.
              RTA_METRICS     int                Route metric

              Fill these values in!

              Add, remove or receive information about a neighbor table  entry
              (e.g., an ARP entry).  The message contains an ndmsg structure.

              struct ndmsg {
                  unsigned char ndm_family;
                  int           ndm_ifindex;  /* Interface index */
                  __u16         ndm_state;    /* State */
                  __u8          ndm_flags;    /* Flags */
                  __u8          ndm_type;

              struct nda_cacheinfo {
                  __u32         ndm_confirmed;
                  __u32         ndm_used;
                  __u32         ndm_updated;
                  __u32         ndm_refcnt;

              ndm_state is a bit mask of the following states:

              NUD_INCOMPLETE   a currently resolving cache entry
              NUD_REACHABLE    a confirmed working cache entry
              NUD_STALE        an expired cache entry
              NUD_DELAY        an entry waiting for a timer
              NUD_PROBE        a cache entry that is currently reprobed
              NUD_FAILED       an invalid cache entry
              NUD_NOARP        a device with no destination cache
              NUD_PERMANENT    a static entry

              Valid ndm_flags are:

              NTF_PROXY    a proxy arp entry
              NTF_ROUTER   an IPv6 router

              The  rtattr  struct  has the following meanings for the rta_type

              NDA_UNSPEC      unknown type
              NDA_DST         a neighbor cache n/w layer destination address
              NDA_LLADDR      a neighbor cache link layer address
              NDA_CACHEINFO   cache statistics.

              If the rta_type field is NDA_CACHEINFO, then a struct nda_cache-
              info header follows

              Add, delete or retrieve a routing rule.  Carries a struct rtmsg

              Add,  remove or get a queueing discipline.  The message contains
              a struct tcmsg and may be followed by a series of attributes.

              struct tcmsg {
                  unsigned char    tcm_family;
                  int              tcm_ifindex;   /* interface index */
                  __u32            tcm_handle;    /* Qdisc handle */
                  __u32            tcm_parent;    /* Parent qdisc */
                  __u32            tcm_info;

              rta_type     value type           Description
              TCA_UNSPEC   -                    unspecified
              TCA_KIND     asciiz string        Name of queueing discipline
              TCA_OPTIONS  byte sequence        Qdisc-specific options follow
              TCA_STATS    struct tc_stats      Qdisc statistics.
              TCA_XSTATS   qdisc-specific       Module-specific statistics.
              TCA_RATE     struct tc_estimator  Rate limit.

              In addition, various other qdisc-module-specific attributes  are
              allowed.   For  more  information  see  the  appropriate include

              Add, remove or get a traffic class.  These  messages  contain  a
              struct tcmsg as described above.

              Add,  remove  or  receive  information  about  a traffic filter.
              These messages contain a struct tcmsg as described above.

       rtnetlink is a new feature of Linux 2.2.

       This manual page is incomplete.

       cmsg(3), rtnetlink(3), ip(7), netlink(7)

       This page is part of release 5.05 of the Linux  man-pages  project.   A
       description  of  the project, information about reporting bugs, and the
       latest    version    of    this    page,    can     be     found     at

Linux                             2020-02-09                      RTNETLINK(7)
Man Pages Copyright Respective Owners. Site Copyright (C) 1994 - 2024 Hurricane Electric. All Rights Reserved.