ppoll

POLL(2)                    Linux Programmer's Manual                   POLL(2)

NAME
       poll, ppoll - wait for some event on a file descriptor

SYNOPSIS
       #include <poll.h>

       int poll(struct pollfd *fds, nfds_t nfds, int timeout);

       #define _GNU_SOURCE         /* See feature_test_macros(7) */
       #include <signal.h>
       #include <poll.h>

       int ppoll(struct pollfd *fds, nfds_t nfds,
               const struct timespec *tmo_p, const sigset_t *sigmask);

DESCRIPTION
       poll()  performs a similar task to select(2): it waits for one of a set
       of file descriptors to become ready to perform I/O.

       The set of file descriptors to be monitored is specified in the fds ar-
       gument, which is an array of structures of the following form:

           struct pollfd {
               int   fd;         /* file descriptor */
               short events;     /* requested events */
               short revents;    /* returned events */
           };

       The caller should specify the number of items in the fds array in nfds.

       The  field  fd  contains  a  file descriptor for an open file.  If this
       field is negative, then the corresponding events field is  ignored  and
       the revents field returns zero.  (This provides an easy way of ignoring
       a file descriptor for a single poll() call: simply negate the fd field.
       Note,  however,  that  this  technique can't be used to ignore file de-
       scriptor 0.)

       The field events is an input  parameter,  a  bit  mask  specifying  the
       events  the  application  is  interested in for the file descriptor fd.
       This field may be specified as zero, in which case the only events that
       can  be returned in revents are POLLHUP, POLLERR, and POLLNVAL (see be-
       low).

       The field revents is an output parameter, filled by the kernel with the
       events  that  actually  occurred.  The bits returned in revents can in-
       clude any of those specified in events, or one of the  values  POLLERR,
       POLLHUP,  or POLLNVAL.  (These three bits are meaningless in the events
       field, and will be set in the revents field whenever the  corresponding
       condition is true.)

       If  none of the events requested (and no error) has occurred for any of
       the file descriptors, then poll() blocks until one of  the  events  oc-
       curs.

       The  timeout  argument specifies the number of milliseconds that poll()
       should block waiting for a file descriptor to become ready.   The  call
       will block until either:

       *  a file descriptor becomes ready;

       *  the call is interrupted by a signal handler; or

       *  the timeout expires.

       Note  that  the timeout interval will be rounded up to the system clock
       granularity, and kernel scheduling delays mean that the blocking inter-
       val  may  overrun  by  a  small amount.  Specifying a negative value in
       timeout means an infinite timeout.  Specifying a timeout of zero causes
       poll() to return immediately, even if no file descriptors are ready.

       The  bits that may be set/returned in events and revents are defined in
       <poll.h>:

       POLLIN There is data to read.

       POLLPRI
              There is some exceptional  condition  on  the  file  descriptor.
              Possibilities include:

              *  There is out-of-band data on a TCP socket (see tcp(7)).

              *  A  pseudoterminal  master  in  packet  mode  has seen a state
                 change on the slave (see ioctl_tty(2)).

              *  A cgroup.events file has been modified (see cgroups(7)).

       POLLOUT
              Writing is now possible, though a write larger that  the  avail-
              able  space  in a socket or pipe will still block (unless O_NON-
              BLOCK is set).

       POLLRDHUP (since Linux 2.6.17)
              Stream socket peer closed connection, or shut down writing  half
              of  connection.   The _GNU_SOURCE feature test macro must be de-
              fined (before including any header files)  in  order  to  obtain
              this definition.

       POLLERR
              Error  condition  (only returned in revents; ignored in events).
              This bit is also set for a  file  descriptor  referring  to  the
              write end of a pipe when the read end has been closed.

       POLLHUP
              Hang  up  (only  returned  in revents; ignored in events).  Note
              that when reading from a channel such as  a  pipe  or  a  stream
              socket, this event merely indicates that the peer closed its end
              of the channel.  Subsequent reads from the channel will return 0
              (end of file) only after all outstanding data in the channel has
              been consumed.

       POLLNVAL
              Invalid request: fd not open (only returned in revents;  ignored
              in events).

       When  compiling with _XOPEN_SOURCE defined, one also has the following,
       which convey no further information beyond the bits listed above:

       POLLRDNORM
              Equivalent to POLLIN.

       POLLRDBAND
              Priority band data can be read (generally unused on Linux).

       POLLWRNORM
              Equivalent to POLLOUT.

       POLLWRBAND
              Priority data may be written.

       Linux also knows about, but does not use POLLMSG.

   ppoll()
       The relationship between poll() and ppoll() is analogous to  the  rela-
       tionship between select(2) and pselect(2): like pselect(2), ppoll() al-
       lows an application to safely wait until either a file  descriptor  be-
       comes ready or until a signal is caught.

       Other than the difference in the precision of the timeout argument, the
       following ppoll() call:

           ready = ppoll(&fds, nfds, tmo_p, &sigmask);

       is nearly equivalent to atomically executing the following calls:

           sigset_t origmask;
           int timeout;

           timeout = (tmo_p == NULL) ? -1 :
                     (tmo_p->tv_sec * 1000 + tmo_p->tv_nsec / 1000000);
           pthread_sigmask(SIG_SETMASK, &sigmask, &origmask);
           ready = poll(&fds, nfds, timeout);
           pthread_sigmask(SIG_SETMASK, &origmask, NULL);

       The above code  segment  is  described  as  nearly  equivalent  because
       whereas  a negative timeout value for poll() is interpreted as an infi-
       nite timeout, a negative value expressed in *tmo_p results in an  error
       from ppoll().

       See  the description of pselect(2) for an explanation of why ppoll() is
       necessary.

       If the sigmask argument is specified as NULL, then no signal  mask  ma-
       nipulation  is  performed (and thus ppoll() differs from poll() only in
       the precision of the timeout argument).

       The tmo_p argument specifies an upper limit on the amount of time  that
       ppoll()  will  block.  This argument is a pointer to a structure of the
       following form:

           struct timespec {
               long    tv_sec;         /* seconds */
               long    tv_nsec;        /* nanoseconds */
           };

       If tmo_p is specified as NULL, then ppoll() can block indefinitely.

RETURN VALUE
       On success, a positive number is returned; this is the number of struc-
       tures which have nonzero revents fields (in other words, those descrip-
       tors with events or errors reported).  A value of 0 indicates that  the
       call timed out and no file descriptors were ready.  On error, -1 is re-
       turned, and errno is set appropriately.

ERRORS
       EFAULT The array given as argument was not  contained  in  the  calling
              program's address space.

       EINTR  A signal occurred before any requested event; see signal(7).

       EINVAL The nfds value exceeds the RLIMIT_NOFILE value.

       EINVAL (ppoll())  The  timeout value expressed in *ip is invalid (nega-
              tive).

       ENOMEM There was no space to allocate file descriptor tables.

VERSIONS
       The poll() system call was introduced in Linux 2.1.23.  On  older  ker-
       nels  that  lack  this  system call, the glibc (and the old Linux libc)
       poll() wrapper function provides emulation using select(2).

       The ppoll() system call was added  to  Linux  in  kernel  2.6.16.   The
       ppoll() library call was added in glibc 2.4.

CONFORMING TO
       poll()  conforms  to  POSIX.1-2001 and POSIX.1-2008.  ppoll() is Linux-
       specific.

NOTES
       The operation of poll() and ppoll() is not affected by  the  O_NONBLOCK
       flag.

       On  some  other  UNIX systems, poll() can fail with the error EAGAIN if
       the system fails to allocate  kernel-internal  resources,  rather  than
       ENOMEM  as Linux does.  POSIX permits this behavior.  Portable programs
       may wish to check for EAGAIN and loop, just as with EINTR.

       Some implementations define the nonstandard constant  INFTIM  with  the
       value  -1  for  use as a timeout for poll().  This constant is not pro-
       vided in glibc.

       For a discussion of what may happen if a file  descriptor  being  moni-
       tored by poll() is closed in another thread, see select(2).

   C library/kernel differences
       The  Linux  ppoll()  system call modifies its tmo_p argument.  However,
       the glibc wrapper function hides this behavior by using a  local  vari-
       able for the timeout argument that is passed to the system call.  Thus,
       the glibc ppoll() function does not modify its tmo_p argument.

       The raw ppoll() system call has a fifth  argument,  size_t  sigsetsize,
       which  specifies  the size in bytes of the sigmask argument.  The glibc
       ppoll() wrapper function specifies  this  argument  as  a  fixed  value
       (equal  to  sizeof(kernel_sigset_t)).  See sigprocmask(2) for a discus-
       sion on the differences between the kernel and the libc notion  of  the
       sigset.

BUGS
       See  the  discussion of spurious readiness notifications under the BUGS
       section of select(2).

SEE ALSO
       restart_syscall(2), select(2), select_tut(2), epoll(7), time(7)

COLOPHON
       This page is part of release 5.05 of the Linux  man-pages  project.   A
       description  of  the project, information about reporting bugs, and the
       latest    version    of    this    page,    can     be     found     at
       https://www.kernel.org/doc/man-pages/.

Linux                             2019-08-02                           POLL(2)
Man Pages Copyright Respective Owners. Site Copyright (C) 1994 - 2024 Hurricane Electric. All Rights Reserved.