openssl enc -ciphername [-help] [-ciphers] [-in filename] [-out
filename] [-pass arg] [-e] [-d] [-a/-base64] [-A] [-k password] [-kfile
filename] [-K key] [-iv IV] [-S salt] [-salt] [-nosalt] [-z] [-md
digest] [-p] [-P] [-bufsize number] [-nopad] [-debug] [-none] [-engine
The symmetric cipher commands allow data to be encrypted or decrypted
using various block and stream ciphers using keys based on passwords or
explicitly provided. Base64 encoding or decoding can also be performed
either by itself or in addition to the encryption or decryption.
Print out a usage message.
List all supported ciphers.
the input filename, standard input by default.
the output filename, standard output by default.
the password source. For more information about the format of arg
see the PASS PHRASE ARGUMENTS section in openssl(1).
-e encrypt the input data: this is the default.
-d decrypt the input data.
-a base64 process the data. This means that if encryption is taking
place the data is base64 encoded after encryption. If decryption is
set then the input data is base64 decoded before being decrypted.
same as -a
-A if the -a option is set then base64 process the data on one line.
the password to derive the key from. This is for compatibility with
previous versions of OpenSSL. Superseded by the -pass argument.
read the password to derive the key from the first line of
filename. This is for compatibility with previous versions of
OpenSSL. Superseded by the -pass argument.
Use the specified digest to create the key from the passphrase.
The default algorithm is sha-256.
the actual key to use: this must be represented as a string
comprised only of hex digits. If only the key is specified, the IV
must additionally specified using the -iv option. When both a key
and a password are specified, the key given with the -K option will
be used and the IV generated from the password will be taken. It
probably does not make much sense to specify both key and password.
the actual IV to use: this must be represented as a string
comprised only of hex digits. When only the key is specified using
the -K option, the IV must explicitly be defined. When a password
is being specified using one of the other options, the IV is
generated from this password.
-p print out the key and IV used.
-P print out the key and IV used then immediately exit: don't do any
encryption or decryption.
set the buffer size for I/O
disable standard block padding
debug the BIOs used for I/O.
-z Compress or decompress clear text using zlib before encryption or
after decryption. This option exists only if OpenSSL with compiled
with zlib or zlib-dynamic option.
Use NULL cipher (no encryption or decryption of input).
The program can be called either as openssl ciphername or openssl enc
-ciphername. But the first form doesn't work with engine-provided
ciphers, because this form is processed before the configuration file
is read and any ENGINEs loaded.
Engines which provide entirely new encryption algorithms (such as
ccgost engine which provides gost89 algorithm) should be configured in
the configuration file. Engines, specified in the command line using
-engine options can only be used for hardware-assisted implementations
of ciphers, which are supported by OpenSSL core or other engine,
specified in the configuration file.
When enc command lists supported ciphers, ciphers provided by engines,
specified in the configuration files are listed too.
encrypted file when it is decrypted.
Some of the ciphers do not have large keys and others have security
implications if not used correctly. A beginner is advised to just use a
strong block cipher in CBC mode such as bf or des3.
All the block ciphers normally use PKCS#5 padding also known as
standard block padding: this allows a rudimentary integrity or password
check to be performed. However since the chance of random data passing
the test is better than 1 in 256 it isn't a very good test.
If padding is disabled then the input data must be a multiple of the
cipher block length.
All RC2 ciphers have the same key and effective key length.
Blowfish and RC5 algorithms use a 128 bit key.
Note that some of these ciphers can be disabled at compile time and
some are available only if an appropriate engine is configured in the
configuration file. The output of the enc command run with unsupported
options (for example openssl enc -help) includes a list of ciphers,
supported by your version of OpenSSL, including ones provided by
The enc program does not support authenticated encryption modes like
CCM and GCM. The utility does not store or retrieve the authentication
base64 Base 64
bf-cbc Blowfish in CBC mode
bf Alias for bf-cbc
bf-cfb Blowfish in CFB mode
bf-ecb Blowfish in ECB mode
bf-ofb Blowfish in OFB mode
cast-cbc CAST in CBC mode
cast Alias for cast-cbc
cast5-cbc CAST5 in CBC mode
cast5-cfb CAST5 in CFB mode
cast5-ecb CAST5 in ECB mode
cast5-ofb CAST5 in OFB mode
des-cbc DES in CBC mode
des Alias for des-cbc
des-cfb DES in CBC mode
des-ofb DES in OFB mode
des-ecb DES in ECB mode
des-ede-cbc Two key triple DES EDE in CBC mode
des-ede Two key triple DES EDE in ECB mode
des-ede-cfb Two key triple DES EDE in CFB mode
idea-cbc IDEA algorithm in CBC mode
idea same as idea-cbc
idea-cfb IDEA in CFB mode
idea-ecb IDEA in ECB mode
idea-ofb IDEA in OFB mode
rc2-cbc 128 bit RC2 in CBC mode
rc2 Alias for rc2-cbc
rc2-cfb 128 bit RC2 in CFB mode
rc2-ecb 128 bit RC2 in ECB mode
rc2-ofb 128 bit RC2 in OFB mode
rc2-64-cbc 64 bit RC2 in CBC mode
rc2-40-cbc 40 bit RC2 in CBC mode
rc4 128 bit RC4
rc4-64 64 bit RC4
rc4-40 40 bit RC4
rc5-cbc RC5 cipher in CBC mode
rc5 Alias for rc5-cbc
rc5-cfb RC5 cipher in CFB mode
rc5-ecb RC5 cipher in ECB mode
rc5-ofb RC5 cipher in OFB mode
aes-[128|192|256]-cbc 128/192/256 bit AES in CBC mode
aes[128|192|256] Alias for aes-[128|192|256]-cbc
aes-[128|192|256]-cfb 128/192/256 bit AES in 128 bit CFB mode
aes-[128|192|256]-cfb1 128/192/256 bit AES in 1 bit CFB mode
aes-[128|192|256]-cfb8 128/192/256 bit AES in 8 bit CFB mode
aes-[128|192|256]-ecb 128/192/256 bit AES in ECB mode
aes-[128|192|256]-ofb 128/192/256 bit AES in OFB mode
Just base64 encode a binary file:
openssl base64 -in file.bin -out file.b64
Decode the same file
openssl base64 -d -in file.b64 -out file.bin
Encrypt a file using triple DES in CBC mode using a prompted password:
openssl des3 -salt -in file.txt -out file.des3
Decrypt a file using a supplied password:
openssl des3 -d -salt -in file.des3 -out file.txt -k mypassword
Encrypt a file then base64 encode it (so it can be sent via mail for
example) using Blowfish in CBC mode:
openssl bf -a -salt -in file.txt -out file.bf
There should be an option to allow an iteration count to be included.
The enc program only supports a fixed number of algorithms with certain
parameters. So if, for example, you want to use RC2 with a 76 bit key
or RC4 with an 84 bit key you can't use this program.
The default digest was changed from MD5 to SHA256 in Openssl 1.1.
Copyright 2000-2016 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the OpenSSL license (the "License"). You may not use
this file except in compliance with the License. You can obtain a copy
in the file LICENSE in the source distribution or at
1.1.0h 2018-05-12 ENC(1SSL)
Man Pages Copyright Respective Owners. Site Copyright (C) 1994 - 2019
All Rights Reserved.