dviluatex

LUATEX(1)                   General Commands Manual                  LUATEX(1)

NAME
       luatex,  dviluatex, luajittex, texlua, texluac - An extended version of
       pdfTeX using Lua as an embedded scripting language

SYNOPSIS
       luatex [--lua=FILE] [OPTION]...  [TEXNAME[.tex]] [COMMANDS]
       luatex [--lua=FILE] [OPTION]...  \FIRST-LINE
       luatex [--lua=FILE] [OPTION]...  &FMT [ARGS]

DESCRIPTION
       Run the luaTeX typesetter on  TEXNAME,  usually  creating  TEXNAME.pdf.
       Any  remaining COMMANDS are processed as luaTeX input, after TEXNAME is
       read.

       Alternatively, if the first non-option argument  begins  with  a  back-
       slash, interpret all non-option arguments as a line of luaTeX input.

       Alternatively,  if  the  first non-option argument begins with a &, the
       next word is taken as the FMT to read, overriding all else. Any remain-
       ing arguments are processed as above.

       If no arguments or options are specified, prompt for input.

       If  called  as texlua it acts as lua interpreter.  If called as texluac
       it acts as lua bytecode compiler.

       LuaTeX is an extended version of pdfTeX with Unicode and OpenType  font
       support,  embedded  Lua  scripting language, the e-TeX and Omega exten-
       sions, as well as integrated MetaPost engine, that can create PDF files
       as  well  as  DVI  files.   For  more  information  about  luatex,  see
       http://www.luatex.org, you can read LuaTeX manual using texdoc  utility
       (texdoc luatex).

       All LuaTeX text input and output is considered to be Unicode text.

       In  DVI  mode, luaTeX can be used as a complete replacement for the TeX
       engine.

       In PDF mode, luaTeX can natively handle the PDF, JPG,  JBIG2,  and  PNG
       graphics  formats.   luaTeX  cannot  include PostScript or Encapsulated
       PostScript (EPS) graphics files; first convert them to PDF using epsto-
       pdf (1).

OPTIONS
       When  the LuaTeX executable starts, it looks for the --lua command-line
       option.  If there is no --lua option, the command line  is  interpreted
       in a similar fashion as in traditional pdfTeX and Aleph. But if the op-
       tion is present, LuaTeX will enter an alternative mode of  command-line
       parsing  in  comparison to the standard web2c programs. The presence of
       --lua makes most of other options unreliable, because the lua  initial-
       ization  file  can  disable kpathsea and/or hook functions into various
       callbacks.

       --lua=FILE
              The lua initialization file.

       The following two options alter the executable behaviour:

       --luaonly
              Start LuaTeX as a Lua interpreter. In this  mode,  it  will  set
              Lua's arg[0] to the found script name, pushing preceding options
              in negative values and the rest of the command line in the posi-
              tive values, just like the Lua interpreter. LuaTeX will exit im-
              mediately after executing the specified Lua script.

       --luaconly
              Start LuaTeX as a Lua byte compiler. In this mode, LuaTeX is ex-
              actly  like  luac  from  the standalone Lua distribution, except
              that it does not have the -l switch, and that  it  accepts  (but
              ignores) the --luaconly switch.

       Then the regular web2c options:

       --debug-format
              Debug format loading.

       --draftmode
              Sets  \pdfdraftmode  so  luaTeX  doesn't write a PDF and doesn't
              read any included images, thus speeding up execution.

       --enable-write18
              Synonym for --shell-escape.

       --disable-write18
              Synonym for --no-shell-escape.

       --shell-escape
              Enable the \write18{command} construct, and Lua functions os.ex-
              ecute(), os.exec(), os.spawn(), and io.popen().  The command can
              be any shell command.  This construct is normally disallowed for
              security reasons.

       --no-shell-escape
              Disable  the \write18{command} construct and the other Lua func-
              tions, even if it is enabled in the texmf.cnf file.

       --shell-restricted
              Enable restricted version of \write18, os.execute(),  os.exec(),
              os.spawn(),  and  io.popen(),  only commands listed in texmf.cnf
              file are allowed.

       --file-line-error
              Print error messages in the form file:line:error which is  simi-
              lar to the way many compilers format them.

       --no-file-line-error
              Disable printing error messages in the file:line:error style.

       --fmt=FORMAT
              Use  FORMAT as the name of the format to be used, instead of the
              name by which luaTeX was called or a %& line.

       --help Print help message and exit.

       --ini  Start in INI mode, which is used to dump formats.  The INI  mode
              can be used for typesetting, but no format is preloaded, and ba-
              sic initializations like setting catcodes may be required.

       --interaction=MODE
              Sets the interaction mode.  The MODE can  be  either  batchmode,
              nonstopmode,  scrollmode,  and  errorstopmode.   The  meaning of
              these modes is the same as that of the corresponding \commands.

       --jobname=NAME
              Use NAME for the job name, instead of deriving it from the  name
              of the input file.

       --kpathsea-debug=BITMASK
              Sets  path  searching  debugging flags according to the BITMASK.
              See the Kpathsea manual for details.

       --mktex=FMT
              Enable mktexFMT generation, where FMT must be either tex or tfm.

       --nosocket
              Disable the luasocket (network) library.

       --output-comment=STRING
              In DVI mode, use STRING for the DVI file comment instead of  the
              date.  This option is ignored inPDF mode.

       --output-directory=DIRECTORY
              Write  output  files  in DIRECTORY instead of the current direc-
              tory.  Look up input files in DIRECTORY first,  then  along  the
              normal search path.

       --output-format=FORMAT
              Set  the  output format mode, where FORMAT must be either pdf or
              dvi.  This also influences the set of  graphics  formats  under-
              stood by luaTeX.

       --progname=NAME
              Pretend to be program NAME (only for kpathsea).

       --recorder
              Enable  the filename recorder.  This leaves a trace of the files
              opened for input and output in a file with extension .fls.

       --safer
              Disable some Lua commands that can easily be abused by  a  mali-
              cious document.

       --synctex=NUMBER
              Enable/disable SyncTeX extension.

       --version
              Print version information and exit.

       --credits
              Print credits and version details.

       The following options are ignored:

       --8bit, --etex, --parse-first-line, --no-parse-first-line
              These are always on.

       --default-translate-file=TCXNAME, --translate-file=TCXNAME
              These are always off.

SEE ALSO
       pdftex(1), etex(1), aleph(1), lua(1).

AUTHORS
       The  primary authors of LuaTeX are Taco Hoekwater, Hartmut Henkel, Hans
       Hagen, and Luigi Scarso, with help from Martin Schroder, Karel  Skoupy,
       and Han The Thanh.

       TeX  was  designed by Donald E. Knuth, who implemented it using his Web
       system for Pascal programs.  It was  ported  to  Unix  at  Stanford  by
       Howard  Trickey,  and  at Cornell by Pavel Curtis.  The version now of-
       fered with the Unix TeX distribution is that generated by the Web to  C
       system (web2c), originally written by Tomas Rokicki and Tim Morgan.

       The LuaTeX home page is http://luatex.org.

Web2C 2019                        27 May 2018                        LUATEX(1)